Stable and Unstable Crack Growth in Viscoelastic Media

The failure of load-bearing structures by fracture is generally important in all phases of our society. It may concern small household items as well as expensive structures of civil or space applications and accordingly may cause varying degrees of economic distress. While the state of failure is usually easily determined as either "not failed" or "completely failed," the estimation of how close to either state a structure is, poses a much more difficult problem. It is important to recognize, however, that from an engineering point of view, the latter problem is the important one because it would allow, in principle, the prediction of the conditions leading to fracture and thus to a close estimate of the service life of a structure. Inasmuch as failures by fracture involve the growth of cracks it appears that keeping track of the size of a crack in a particular structure provides a means of assessing *quantitatively* the strength prior to complete failure. If one agrees that the description of structural strength is rationalized in terms of the size of the defects, it foll0ws that one must attempt to understand the laws that govern the growth of such defects in order to predict complete failure. Fracture of materials is a complicated process which encompasses atomistic aspects, as well as microscopic and large-scale continuum mechanical considerations. Although one of these aspects should not be considered without the other we shall be concerned with the continuum-mechanical formulation of the problem of fracture growth in viscoelastic materials. From this viewpoint the prediction of failure comprises three phases: first an examination of the physical situation presented by a static or growing defect in a material, second the translation of this physically observable situation into a mathematical model which is amenable to analysis by currently available or extendable tools of mathematics, third the theoretical exploitation of the mathematical model in an attempt to predict the behavior of defects under load and the comparison of these results with experimentally observable phenomena to assess the validity of the modelling process as given from phase one and phase two. While there are many important details that have bearing on such a development we shall be concerned more with the principles of the analysis and show how the various considerations of the three phases enter into the overall structure of the crack propagation problem. In keeping analytic work as simple as possible it is intended to emphasize what type of results may be obtained with the aid of continuum mechanics and where continuum mechanics requires support by microscopic considerations

Time dependent fracture of polymers

The fracture behavior of polymers is reviewed with emphasis on the time dependent aspects of the problem. Following a delineation of the history of crack propagation investigations in linearly viscoelastic materials, the effects of temperature and solvent environment are examined besides the special effects arising from fatigue loading. These phenomena are examined for both crosslinked and uncrosslinked polymers. Some special consideration is given to the phenomena connected with craze formation in amorphous homopolymers as well as in crystalline materials as exemplified by polyethylene. Finally, status of analytical tools and formulations of fracture problems involving non-linearly viscoelastic material behavior is delineated by means of some examples

Failure criteria for viscoelastic materials

Research projects concerned with developing a theory of fracture of materials are discussed. The effects of the geometry of the structure and the loads acting on the structure as they influence the failure process are analyzed. The effects of the viscoelastic deformation characteristics of the bulk elastomer on failure behavior are examined. Additional material parameters which control the fracture process are identified

Fracture mechanics and the time dependent strength of adhesive joints

Fracture mechanics and time dependent strength of adhesive joint

Failure criteria for viscoelastic materials Semiannual status report, 1 Jul. 1966 - 28 Feb. 1967

Fracture mechanisms for viscoelastic material

Deformation Measurements at the Sub-Micron Size Scale: II. Refinements in the Algorithm for Digital Image Correction

Improvements are proposed in the application of the Digital Image Correlation method, a technique that compares digital images of a specimen surface before and after deformation to deduce its sureface (2-D) displacement field and strains. These refinements, tested on translations and rigid body rotations were significant with regard to the computer efficiency and covergence properties of the method. In addition, the formulation of the algorithm was extended so as to compute the three-dimensional surface displacement field from Scanning Tunneling Microscope tomographies of a deforming specimen. The reolsution of this new displacement measuring method at the namometer scale was assessed on translation and uniaxial tensile tests and was found to be 4.8 nm for in-plane displacement components and 1.5 nm for the out-of-plane one spanning a 10 x 10 μm area

Submicron Deformation Field Measurements II: Improved Digital Image Correlation

This is the second paper in a series of three devoted to the applicaiton of Scanning Tunneling Microscopy to mechanics problems. In this paper improvements to the Digital Image Correlation method are outlined, a technique that compares digital images of a specimen surface before and after deformation to deduce its (2-D) surface displacement field and strains. The necessity of using the framework of large deformation theory for accurately addressing rigid body rotations to reduce associated errors in the strain components is pointed out. In addition, the algorithm is extended to compute the three-dimensional surface displacement field from Scanning Tunneling Microscope data; also, significant improvements are achieved in the rate as well as the robustness of the convergence. For Scanning Tunneling Microscopy topographs the resolution yields 4.8 nm for the in-plane and 1.5 nm for the out-of-plane displacement components spanning an area of 10 μm x 10 μm

Failure criteria for viscoelastic materials Quarterly progress report

Crack propagation and failure criteria studies for viscoelastic materials, particularly solid propellant

Pressure induced ageing of polymers

The nonlinearly viscoelastic response of an amorphous homopolymer is considered under aspects of time dependent free volume behavior. In contrast to linearly viscoelastic solids, this model couples shear and volume deformation through a shift function which influences the rate of molecular relaxation or creep. Sample computations produce all those qualitative features one observes normally in uniaxial tension including the rate dependent formation of a yield point as a consequence of the history of an imposed pressure

The Fracture Energy and Some Mechanical Properties of a Polyurethane Elastomer

The energy required to form a unit of new surface in the fracture of a polyurethane elastomer is determined. The rate sensitivity of the material has been reduced by swelling it in toluene. This paper primarily describes the experimental work of measuring the lower limit of the fracture energy. With this value and the creep compliance as a basis, the rate dependence of fracture energy for the unswollen material has been determined. It is thus shown that the dependence of the fracture energy on the rate of crack propagation can be explained by energy dissipation around the tip of the crack. Good agreement between the theoretically and experimentally determined relationships for the rate-sensitive fracture energy is demonstrated